Anchorages

Anchorages

7 ft Tripod

Model: FA 60 001 00

  • Telescopic legs adjustable height from 1.15 mtrs to 2.15 mtrs.
  • Wheelbase: 1.5 mtrs.
  • Maximum load capacity: 200 kgs.
  • Also available in 10 ft (Model: FA 60 002 00).

10 ft Tripod

Model: FA 60 002 00

  • Telescopic legs adjustable height from 1.9 mtrs to 2.9 mtrs.
  • Wheelbase: 1.8 mtrs.
  • Maximum load capacity: 200 kgs.
  • Also available in 7 ft (Model: FA 60 001 00).

Rescue and work winch

Model: FA 60 003 00

  • 4.8mm dia x 20 mtr galvanised steel wire rope.
  • Load capacity 135 kgs

Anchorage Webbing Sling

Model: FA 60 004 15

  • 44mm wide webbing with stainless steel 'D' ring at each end.
  • Minimum breaking strength 15 kN.
  • Length 1.5 mtrs

Anchorage Round Sling

Model: FA 60 005 08

  • 20mm wide polyester webbing.
  • Length 0.8 mtrs.
  • Minimum breaking strength 10 kN.

Anchorage Round Sling

Model: FA 60 005 12

  • 20mm wide polyester webbing.
  • Length 1.2 mtr.
  • Minimum breaking strength 10 kN.

Anchorage Round Sling

Model: FA 60 005 15

  • 20mm wide polyester webbing.
  • Length 1.5 mtrs.
  • Minimum breaking strength 10 kN.

Anchorage Steel Wire Rope Sling

Model: FA 60 006 10

  • Designed for structures with sharp edges.
  • 8mm PVC coated galvanised steel wire rope.
  • Steel thimble eyes at each end.
  • Minimum breaking strength 15 kN.
  • Length 1.0 mtr.

Anchorage Steel Wire Rope Sling

Model: FA 60 006 20

  • Designed for structures with sharp edges.
  • 8mm PVC coated galvanised steel wire rope.
  • Steel thimble eyes at each end.
  • Minimum breaking strength 15 kN.
  • Length 2.0 mtrs.

Temporary lifeline

Model: FA 60 007 00

  • Secures an operator throughout travel.
  • Horizontal lifeline in 30mm webbing.
  • Forked ends in order to either anchor to a structure without the need to add anchorage sling or hang directly on adapted anchorage point.
  • Steel ratchet to put the system into tension after adjusting the required length.
  • Supplied with 2 steel snap hooks.
  • Adjustable length from 2 mtrs to 20 mtrs.
  • Minimum breaking strength 25 kN.

Beam Anchor

Model: FA 60 008 00

  • Made of aluminium and brass.
  • Minimum breaking strength: 23 kN.
  • Net weight 1850g.
  • Designed to be installed on beams from 100-330mm.

Compact Beam Anchor

Model: FA 60 008 01

  • Made of aluminium and brass.
  • Minimum breaking strength: 23 kN.
  • Net weight 1600g.
  • Designed to be installed on beams from 70-150mm.

Beam Anchor Trolley

Model: FA 60 008 02

  • Suits beam width 80-250mm.
  • Anchoring on D-ring, inner diameter 55mm.
  • Steel & Aluminium.
  • Minimum breaking strength 23kN.

Parapet Anchor

Model: FA 60 010 00

  • Designed to be used with low parapet walls.
  • Can be installed on parapets with dimensions from 60-360mm.
  • Minimum breaking strength 25kN.

Stainless Steel Anchorage Point

Model: FA 60 011 00

  • Designed to be fixed with a chemical ankle.
  • Net weight 300g. 
  • Minimum breaking strength : 22 kN.

Hinged Steel Roof Anchor

Model: FA 60 012 00

  • Designed to be mounted on a wooden frame by intermediate special nails.
  • Re-useable.
  • Forged 'D' ring.
  • Minimum breaking strength 22kN.

Vertical Anchorage D Bolt

Model: FA 60 014 00

  • Forged steel material.
  • Net weight 450g. 
  • Minimum breaking strength : 25 kN.
  • Designed to be installed on a vertical surface.

Door Anchor

Model: FA 60 015 00

  • Designed to be installed on frames from 60-125cm.
  • Can be used by 2 people at the same time.
  • Supplied with bag.
  • Minimum breaking strength 13kN.

Flame Resistant Anchorage Webbing Sling

Model: FA 60 017 15

  • 1.5 mtr length.
  • 44mm wide webbing.
  • Steel D-rings at each end.
  • Minimum breaking strength 15 kN.

Concrete Anchor

Model: FA 60 018 00

  • Steel material.
  • Net weight 150g. 
  • Minimum breaking strength : 23 kN.
  • Designed to be installed in concrete very quickly thanks to a pressure button that wedges the anchor point into the structure.
  • A hole of 19mm dia and 75mm depth is required to be installed into concrete.

Toggle Anchor 200mm

Model: FA 60 019 00

  • 200mm overall length.
  • Quick & easy installation on horizontal steel surfaces.
  • Pressure button technology that can be selected open or locked.
  • A hole of 21-30mm is needed for installation.
  • Minimum breaking strength 23 kN.

Toggle Anchor 500mm

Model: FA 60 019 01

  • 500mm overall length.
  • Quick & easy installation on horizontal steel surfaces.
  • Pressure button technology that can be selected open or locked.
  • A hole of 21-30mm is needed for installation.
  • Minimum breaking strength 23 kN.